Inverter Air Plasma Cutter

Home » Products » Inverter Air Plasma Cutter » CUT-80 Inverter Air Plasma Cutter
Inverter Air Plasma Cutter

CUT-80 inverter air plasma cutter can be used for arbitrary curve cutting of sheet metal and two casters give it strong portability. The design and the layout of control buttons of this product are the same with model CUT-60. Besides that, they have the same key cutting parameters and they can be used in the thickness range from 1 to 25mm. However, they still have some differences. To be more specific, model cut-80 is bigger and heavier and the range of current for it is wider than that of model cut-60.

As a reminder, please install cutting torch correctly and carefully, and make sure all the parts of CUT-80 inverter air plasma cutter fit very well. At the same time, gas and cooling gas flow should be ensured and all of the components should be placed on a piece of clean flannel to avoid contamination.

Detailed Specifications
Model No.: CUT-80
Rated input voltage: Three-phase 380V±10%
No-load voltage: 260 V
Current welding range: 20-80 A
Rated input power: 12 KVA
Rated input current: 16.8 A
Rated output current: 80 A
Rated load voltage: 112 V
Duty cycle: 60%
Incise the thickness biggest: ≤25mm
Incise the thickness best: ≤20mm
N.W.: 37kg
Dimension (L×W×H): 580×300×560mm

Jing Gong Welding is an inverter air plasma cutter manufacturer and supplier in China. We offer a comprehensive range of products, including inverter air plasma cutter, portable CNC flame plasma cutting machine, industrial TIG welding machine and more.

Feedback Form

Other Products
  • CUT-100 Inverter Air Plasma Cutter CUT-100 inverter air plasma cutter can be used as stainless steel cutting machine in steel structure manufacturing, vehicle maintenance and other occasions. Under rated input power and current, the maximum cutting thickness for this product is 30mm. In addition to that, please replace the consumable parts on time because cutting torch could be serious damaged by uncontrollable air plasma arc created by severe ...
  • CUT-120 Inverter Air Plasma CutterCUT-120 inverter air plasma cutter is used as titanium plate cutter. The back of the machine, with no gauge or button, can be connected to a small air compressor and the recommended pressure is between 4.5 and 5.5 for normal operation. At the same time, there is built-in protection circuit of over-current, overheating, overvoltage and under voltage to ensure safety.