Industrial Inverter DC TIG Welding Machine

Home » Products » Inverter DC TIG Welding Machine » Industrial TIG Welding Machine » TIG-315 Industrial Inverter DC TIG Welding Machine
Industrial Inverter DC TIG Welding Machine

TIG-315 Industrial inverter DC TIG welding machine is sheet metal welding equipment. It can weld a variety of ferrous metal. And the thickness of plate should be 0.5-6mm. It is greater than the general level welding equipment. There are three adjustment knobs on the control panel. The larger one is output current knob. And the others are arc force knob and post flow time knob. It also has the switching button between TIG and MMA, so you can choose based on the actual occasion.

Parameters of TIG-315 Industrial Inverter DC TIG Welding Machine
Rated input voltage: three phase 380V±10%
Rated input power: 8.9KVA
Rated input current: 13.4A
No-load voltage: 68V
Output current range: 10-315A
Rated output current: 315A
Post flow time: 1-10S
Rated load voltage: 22.6V
Duty cycle: 60%
N.W.: 35.5kg
Dimension (L×W×H):580×300×560mm

Feedback Form

Other Products
  • TIG-400 Industrial Inverter DC TIG Welding MachineThis industrial inverter DC TIG welding machine is very similar to TIG-315 in performance. It is more heavy than TIG-315. It adopts IGBT inverter technology. The thickness of plate is 0.5-8mm. It has accident prevention measures, including protection ground, well insulation blocking and low no-load voltage. While it still exists a certain danger because of the sudden variability between the output voltage and current ...
  • TIG-500 Industrial Inverter DC TIG Welding MachineTIG-500 Industrial inverter DC TIG welding machine is the largest and heavy of our three phase inverter welder. The thickness of welding plate is 0.5-10mm. It adopts advanced inverter technology. It has HF are starting, well arc performance and sufficient welding current. Besides, it can save 20% electricity compared with the same power SCR rectifier welder. So it can reduce your cost of production.