Inverter DC TIG Welding Machine

Home » Products » Inverter DC TIG Welding Machine » General Inverter DC TIG Welding Machine » TIG-160 Inverter DC TIG Welding Machine
Inverter DC TIG Welding Machine

TIG-160 Inverter DC TIG welding machine has a handle at the top of the machine box. The handle is made of engineering plastics. So you can move easily the device and do not need to configure the casters. It not only has high efficiency, but also can be energy saving. This product can start arc at high frequency. It melting bath is deep. The welding surface is smooth and beautiful. The thickness of welding plate is 0.5- 2mm.

The insulation class is F, means that difference between maximum allowable welding temperature and ambient temperature is about 155 degrees Celsius. While we recommend that the reference temperature difference should be below 120 degrees Celsius. It can be applied for stainless steel decoration and processing of general industrial products .

Parameters of TIG-160 Inverter DC TIG Welding Machine
Input voltage: AC220V(single phase)±10%
Input frequency: 50/60Hz
Rated input power capacity: 3.2KVA
No-load voltage: 100V
Output current range: 10-160A
Rated output voltage: 16.4V
Duty cycle: 60%
No-load loss: 40W
Arc-starting: HF
Efficiency: 80%
Power factor: 0.85
Insulation class: F
Protection class of case: IP21S
Post flow time: 2.5S
Welding thickness: 0.5-2mm
N.W.: 8kg
Dimension (L×W×H):360×180×330mm

Feedback Form

Other Products
  • TIG-200 Inverter DC TIG Welding MachineTIG-200 Inverter DC TIG welding machine adopts advanced IGBT control system. So it has good controllable performance. It is good-quality general carbon steel welding equipment. It has strong welding penetration and the surface of welding is smooth and neat. It can weld carbon steel, stainless steel, cuprum, titanium steel, etc. The thickness of the sheet material should be 0.5-3mm. It is used for processing of the stainless steel ...
  • TIG-250 Inverter DC TIG Welding MachineTIG-250 Inverter DC TIG welding machine adopts PWM inverter technology. It has high power efficiency, low load loss, HF are starter and good welding quality. The thickness of welding plate should be 0.5-4mm. It is particularly suitable for stainless steel decoration, kitchen equipment, stainless steel products and other industries.